Write a Review

Shimano BB-ES51 Octalink V2 Bottom Brackets - Fits Shimano Octalink V2 Spline Cranksets - Crankarm fixing bolts not included

Run silent, run deep. Shimano's ZEE rear derailleur uses a short cage and a Shadow profile to keep tucked out of the way of rocks, roots, whatever. The Plus part is a one-way clutch system that stabilizes the cage and your chain when ripping over rough terrain. Chain slap and the noise that goes with it, as well as dropped chains, are virtually eliminated. Of course, it still has the smooth action and sniper-like shifting that Shimano is rightly famous for. Freeriders and trail riders can run a typical MTB cassette like an 11-32, 11-34, or 11-36. And DHers can choose the close-ratio version and run a road cassette like 11-23, 11-25 or 11-28.

Cut through the darkness with the newly designed Metro Plus™ 800, unleashing an intense 800 lumens on the roads and trails with exceptional brightness and clarity. Its cycling tuned lens maximizes your line of sight with an extra-wide, long-range smooth beam. Not only limited to night, the Metro Plus' DayLightning® mode makes you stand out in broad daylight to give you the advantage anytime and anywhere you ride. - Powerful 800 lumen output with 9 light modes - Built-in 24/7 Safety Technology® gives you a powerful selection of night and day modes (Boost - High - Medium - Low - SteadyPulse® - DayLightning® - Triple Flash - Zoom - Walking) - SteadyPulse® mode alerts night time motorists with pulses while constantly lighting your path - DayLightning® mode emits lightning-like flashes to highlight your presence in the brightest of daytime hours - Enhanced Cycling Optics™ (ECO) expands your visibility with an extra-wide and long-range beam - USB rechargeable Li-ion battery - Low battery indicator - Light activation lockout prevents accidental light activation - Light mode memory saves the mode you're in before the light is turned off - Rugged, water-resistant design only weighs 140 grams - Side illumination ports highlight your presence to nearby motorists - 2nd generation Locktite™ quick-release handlebar mount securely clamps to 22mm to 32mm diameter handlebars RUN TIMES: - Low: 6:30 hrs - Medium: 3 hrs - High: 1:30 hrs - Boost: 1 hr - Zoom: 3:30 hrs - SteadyPulse®: 3:30 hrs - DayLightning®: 12 hrs - Triple Flash: 18 hrs - Walking: 110 hrs - CHARGE TIME: 5 hrs - MOUNTING: Handlebar - BATTERY: Built-in Li-ion - SYSTEM WEIGHT: 140g *Features and specs are subject to change without notice.

Replacement Barends for GP5 and GP5 BioKork Grips. - Note because of additional leverage of GP4 and GP5 bar ends, Ergon does not recommend using on carbon fiber handlebars - Glass fiber composite - For 2015 and newer grips

Your rock-steady set and forget road bar. Only a few grams heavier than the EA70 and sporting the same MCD drop technology as our top of the line road bars. These budget friendly bars will leave you comfortable in the saddle all day without breaking the bank. - Finish: Black Ano/Water Transfer Graphics - Bar weight: 315g (42cm) - Clamp diameter: 31.8mm - Width (center-to-center): 38cm, 40cm, 42cm, 44cm, 46cm - Reach: 80mm - Drop: 125mm - Materials: EA50 alloy

Banjo Brothers' Saddlebag Panniers are perfect for commuting, everyday errands, and light touring. They mount to most rear racks (sold separately) with a single strap, so you can just load them up with work stuff and take the whole bag into the office. They're low profile, so they won't slow you down and they're built with ripstop fabric with ballistic reinforcing in wear areas so they will last and last, like all of Banjo's gear. These saddlebags also feature cinch straps on top to hold extra gear and reflective accents all around for extra visibility.

- Premium red formula all-purpose bicycle grease

GUNNING FOR THE RACE WIN OR DIGGING DEEP FOR A PR, THIS COMPOSITE ROAD RACING BIKE GIVES YOU THE SPEED, EFFICIENCY AND CONTROL TO PUSH IT TO THE LIMIT, AND THEN A LITTLE BIT MORE. KEY PERFORMANCE FACTORS Class-leading efficiency Combining best-in-class stiffness-to-weight with strategically placed aero-tube shaping, this frameset is engineered for faster climbing, explosive acceleration, and unyielding pedaling stiffness for race-winning performance. Advanced aerodynamics This is where the TCR’s most quantifiable gains can be found compared to previous-generation models. Every tube shape was analyzed, engineered and tested to create an overall structure with significantly lower drag at a wider range of yaw angles. Total control Integrated disc brakes deliver smooth, powerful stopping power and modulation for added control in variable weather and road conditions. Flat mounts and new thru-axles boost stiffness and improve overall handling, while added frame and fork clearance allows for larger diameter tires up to 32mm. TECHS & FEATURES ADVANCED COMPOSITE TECHNOLOGY Giant’s High-Performance Grade raw carbon material is used to produce this custom frame material in our own composite factory with a high stiffness-to-weight ratio. The front triangle of these framesets is assembled and molded as one continuous piece in a proprietary manufacturing process called Modified Monocoque Construction. OVERDRIVE Giant’s original oversized fork steerer tube technology. Designed to provide precise front-end steering performance, the system’s oversized headset bearings (1 1/4" lower and 1 1/8" upper for road, 1 1/2" lower and 1 1/8" upper for mountain) and tapered steerer tube work in conjunction to provide optimal steering stiffness. COMPACT ROAD DESIGN Introduced by Giant with the professional Team ONCE in the 1990s, Compact Road revolutionized the look and feel of high-performance road bikes forever. A downward-sloping toptube (from the headtube to the seattube) creates smaller front and rear triangles for a lighter, stiffer bike. It also makes it easier for riders of all sizes to have a perfect fit. TUBELESS SYSTEM Fewer flat tires. Greater traction. Less rolling resistance and a smoother, faster ride. Giant’s Tubeless System makes it easier than ever to experience all these benefits.

Wolf Tooth headsets are machined here in our Minnesota shop with aircraft-grade 6061 aluminum. They are designed to be lightweight, strong, and durable. Our headsets have three levels of industry-leading custom sealing to protect bearings from the elements and prolong the life of the headset. Available in a variety of colors. These ZS headsets are for frames with internal bearing cups that are pressed into the frame. Premium Headsets with Enduro stainless steel bearings have a lifetime warranty. Upper assembly features: - Ultralight stem cap with integrated spacer plus an aluminum bolt and a star nut. - 6, 15, and 25 mm stack height top cover options (6mm cover = 6mm total stack, 15mm cover = 15 total stack, 25mm cover = 25mm total stack). - O-ring seal prevents water intrusion around the steerer tube. - Custom-molded upper lip seal provides additional protection for the upper bearing.

For your most demanding mountain biking and gravel cycling, these advanced bib shorts provide the comfort and breathability you need. A mesh bib solution allows for maximum ventilation while stretchy and durable Lycra Sport Energy fabric and an Infinity C2 pad work together for unparalleled comfort. Pockets on both legs and a zip pocket at the back provide ample safe storage for your longest and most challenging rides. - Mesh bib solution for great breathability - Pockets on both legs with stretch opening keep belongings in place - Silicone leg ending elastic that keeps the bib shorts in place - Zip pocket at back for safe storage - Infinity C2 Pad for enhanced comfort

- The same tubeless valves, now with a Tire Insert air flow system - 6 slots machined into the base of the valve stem allow air to flow freely around tubeless tire inserts - Upgraded to aircraft grade 7075 aluminum valve stem and cap - 4mm machined Allen Key slot for easy installation/removal - Valve core removal tool integrated into valve cap - Includes multiple rubber bases to optimize fit with multiple rim types

- Chromoly steel BMX style forks - Perfect replacement for modern BMX-inspired wheelie bikes - Steerer Type: Threadless - Steerer Size: 1-1/8-inch - Material: Chromoly - Race Diameter: 30mm - Axle: 3/8-inch

- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|

Wolf Tooth headsets are machined in the USA with aircraft-grade 6061 aluminum. Our Performance Headset is built to include a black oxide-coated chromium steel bearing and a one-year warranty. Our headsets stand above the rest with three levels of superior custom sealing to protect bearings from the elements and prolong the life of the headset. They are designed to be lightweight, strong, and durable. Available in a variety of colors. These EC headsets are for frames with external bearing cups, which places the bearing outside of the frame with these headsets. Lower assembly features: - Custom molded dual-lip seal on the crown race to protect the lower bearing in the toughest conditions. - 12.25mm stack. - Service and additional parts available.

- Alloy frame with Polypropylene body and inlaid TPE rubber tread - Entry-level upgrade for cruiser-style bikes - 7mm boron steel axle

WTB's Technical Trails feature built-in zip-tie channels to keep them stable in sloppy conditions. And, these slim grips are easy to cut and are compatible with trigger and grip shifters.

With years of experience and feedback, Kuat overhauled every feature and streamlined the look while maintaining the spirit of its predecessor. A re-designed pivot system with foot assist will endure a lifetime of abuse. Adjustable cradles allow for fast bike fit adjustments. Individual bike cable locks are longer, more durable, and easier to use. Holds bikes with up to 4.8-inch tires ensure a true fit for any bike in your stable. Updated ratchet arm creates an intuitive release and a more stable tow. The ground-up re-design of the Trail Doc work stand delivers a pro level feel. These are only the highlights, resulting from 3 years of extensive development, making the NV 2.0 the most advanced hitch rack on the planet. - Adjustable front tire cradle system - Re-designed pivot with optional foot assist - Fully integrated cable locks - Trail Doc included - Front tire ratchet design with an intuitive release - Rear tire strap features a co-molded strap to protect wheels - No-tool install with hand tight hitch cam system - Premium gloss metallic powder with water transferred logos - Hitch lock included - 2 Bike capacity up to 60 lbs. each - Holds wheelbases up to 48-inch, and tires as large as 4.8-inch with use of the Phat Bike Kit - Fits 20-inch to 29-inch tires - Wheel adapter needed for 20-24-inch tires - Available in both 2-inch & 1.25-inch hitch sizes - Dedicated 2-inch model is able to carry up to 4 bikes with optional NV 2.0 Add-On

A waterproof top tube mounted bag featuring sonically welded DryBag technology to keep contents dry while the hard-shell construction keeps DryBag in streamlined shape to avoid leg contact. Quick and convenient access to energy bars, gels, other food items and perfect for small electronic devices too. - CAPACITY: 0.8 L / 50 ci - COMPARTMENT: One main - MATERIAL: Plastic hard shell / TPU - BAG ATTACHMENT: Adjustable nylon straps and waterproof zipper - TOP TUBE DIAMETER: Fits 38 – 52 mm - HEAD TUBE DIAMETER: Fits ø53 – 100 mm - SIZE: 22.8 x 8.9 x 5.9 cm / 9” x 3.5” x 2.3” - WEIGHT: 100 g / 3.53 oz

Powerful stretch and recovery combined with high-density chamois, moisture wicking fabrics and exceptional fit. Features - Shorter 6” inseam - Dual Fabric construction - Powerful Stretch and recovery - 3D molded, multi-layer pad - Non-restrictive leg bands with silicone printing - Soft waistband for added comfort - Reflective accents Fit: Modified eight-panel design Inseam: 6” (Size Medium) Fabric: Power+™ Titan PS™ UPF: 40+ Chamois: Contour Pro™

The XM 1700 SPLINE wheels were designed to dominate the mountain. Light and robust welded rims with perfect tubeless compatibility for grip and puncture resistance, built on reliable and smooth rolling 350 hubs. - Welded Aluminum rim with 30mm internal width - 350 hub with 36 point SL Ratchet system - Competition spokes and Squorx nipples - Designed for All Mountain applications

Get dual performance with these transitional mountain bike shoes. Designed to grip the pedals, they have a weather-resistant suede upper for soft comfort. The skate shoe design is padded for comfort, yet lightweight for all-day rides and walks around town. - One-piece molded rubber cupsole - Non-marking, high-friction Stealth Phantom rubber outsole - Micro Dotty tread - Weight per shoe: 326g (based on Men's Size 9)

- DT Swiss cartridge bearings - Sold in pairs

- V-Brake design - Cartridge type brake pads - Inner cable lead unit included - Adjustable linear springs on both sides - Longer brake arm resulting in a better spacing for mudguards

A fast and efficient shoe with tested strength and grip for the most demanding rides. Intuitive adjustments and a clean design make the Sidi Fast 2 an easy-to-use high-performance shoe. -The Single Tecno-3 system creates a perfect tension balance between the shoe's internal and external side, guarantees an excellent closure adapting to every instep -The newly designed integrated heel cup is lightweight and reinforced to avoid deformations after prolonged strenuous use -The Aerolite sole is designed to maximize aerodynamics and power transmission -The nylon and carbon fiber construction of the Aerolite Sole provides the ideal balance of stiffness for efficient power transfer, and flexibility for comfort -The Fast 2 includes a user replaceable polyurethane heel pad for improved stability and traction off the bike

The all new Bluegrass Vapor Lite is a pure performance glove. Made for the hottest day on the saddle, it’s the lightest and most breathable MTB glove in our range. Its simplicity hides the advanced technical textiles that characterize it. - Four-way-stretch, perforated, featherweight breathable mesh on the upper construction - Minimalist cuff ensures comfort and an ergonomic shape - Breathable perforated palm to improve ventilation and comfort - Silicone wrist gripper keeps gloves securely on - Moisture-wicking mesh finger gussets enhance ventilation and sweat evaporation - Soft-touch covered thumbs to clean dirt and sweat from face and eye-wear - Fade-resistant sublimated graphics for a modern look - Hollow overlay thumbs maximize durability and prevent blisters

Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.

Triangular frame bag in the shape and design of a cheesy slice of pepperoni pizza. Perfect for a phone, snacks, tools or other small items - Mount: Adjustable Straps - Size: 10.8x1.92x7.48" - Volume: 63.55 c.i.

Flared Adventure and Gravel bar made of EC90 carbon composite - 10 degrees of flare (adds 68mm to bar width at tip of drops) - Ergonomic top section and size-specific shape to optimize strength, weight and ride feel - Maximum Contact Drop (MCD) shape for comfort and control - Internal routing for Di2 wiring - 205g @ 42cm (width measured center-to-center)

If your ride doesn't feel complete until you get a little dirt on your tires, you know the importance of capable components that can tackle anything. The RED XPLR eTap AXS rear derailleur is a dedicated 1x-specific unit designed for use with the XPLR 10-44 cassette. It makes for an uncluttered drivetrain that takes on pavement and singletrack with equal aplomb. Wireless and proven eTap shift logic, AXS connectivity and advanced chain management mean this derailleur does exactly what you want when you need it. - Wireless electronic eTap shift logic for intuitive shifting, easy setup, and reliability - 1x specific for use with 10-44T XPLR and 10-36T cassettes - SRAM AXS enabled, allowing easy personalization - Chain management keeps the drivetrain quiet and secure - Large X-SYNC pulleys for increased durability and efficiency - Compatible with existing eTap batteries - Cage Material (RD): Aluminum - Pulley Bearings Material: Ceramic - Max Tooth: 44 NOTE: Does not include eTap battery. Compatible with existing eTap batteries.

The MET Manta MIPS defines the MET aesthetic with its highly contemporary design and aerodynamic engineering. Featuring the MIPS-C2 rotational management system, the MET Manta MIPS is able to slide in the case of a crash, redirecting damaging rotational motion. MIPS is a brain protection system—engineered to add at least 10% extra safety to the standard construction of helmets in case of certain impacts. The MIPS Brain Protection System (BPS) is attached inside the helmet, between the comfort padding and the EPS. The Fidlock magnetic buckle makes it easier and faster to fasten the helmet. Despite being primarily an aero helmet it is also well ventilated. We've engineered the internal shape to channel the air, while MET's signature NACA Vent works in synergy with the specially positioned exhaust ensuring a constant airflow through the helmet, without catching the wind and creating drag. - In-mold polycarbonate shell with EPS liner - MIPS C2 rotational management system is engineered to add protection in case of certain impacts - Exceptionally comfortable and secure on the head thanks to refined internal shape - MET Safe-T Orbital Fit System - 360° head belt, and vertical and occipital adjustments offer a customized fit - Air Lite straps with adjustable divider maximize aerodynamic and comfort - Fidlock Magnetic Buckle makes it easier to secure the helmet - 15 vents are internally engineered with an air channeling system to improve ventilation and comfort - Sunglasses ports securely dock sunglasses when climbing or resting - Tube-shaped tail to improve aerodynamics - Reflective rear stickers - Certifications CE; AS/NZS; US Sizing: - Small/Medium = 52 – 56cm - Medium/Large = 56 – 58cm - Large/X-Large = 58 – 61cm