Write a Review

• Fits BB92, BB89.5 and BB86.5 frames • Easily serviced, replaceable sealed bearings and external labyrinth seal • Cups pressed in and held in place by a screw in centre tube stopping any movement or play usually found in press-fit frames • Compatible with any 24mm axle cranks • Requires Hope PressFit BB tool for installation (sold separately) • Available with either stainless steel or ceramic bearings

- 3D forged 6061 alloy road stems in 6 or 17 degree angles - Lightweight 4 bolt faceplate - Material: AL6061-T6 - Finish: Sandblasted

NOTHING BEATS THE FEELING OF YOUR FIRST PEDAL BIKE. THIS TWO-WHEELER COMES WITH REMOVABLE TRAINING WHEELS AND MAKES IT EASY FOR KIDS TO FALL IN LOVE WITH CYCLING. KEY PERFORMANCE FACTORS Built for kids Short crank length and narrow Q-factor make Animator easy to pedal, and a lightweight aluminum frame allows small children to have more control. Kid-friendly features Short-reach brake levers, lower stand-over height, protective stem pad and removable training wheels make it fun and safe for kids learning to ride a pedal bike. Durable ALUXX aluminum frame material provides long-lasting reliability, backed by a lifetime warranty on the frame.

Wolf Tooth Waveform Aluminum Pedals are designed for all-mountain riding, from XC to downhill. They are engineered to lock in your foot with a shape that matches your shoe, rear-loading pins for grip, and a dual-concave profile to further cradle your feet. The pedals come in two sizes, and are proportionally scaled to provide a supportive platform shaped to match the footprint of your shoe. Large is 112mm x 106mm, small is 105mm x 99mm. Dual-Concave Profile: - Waveform pedals are 14mm thick on the perimeter and just 12.5mm thick in the center. This profile cradles your foot, front to back and side to side. Extra Grip: - Each side of the pedal has 11 stainless steel rear-loading pins for loads of traction. An additional six pins ship with each set of pedals and they are available as replacement parts. Shaped with Purpose: - The shape of Waveform Aluminum Pedals matches the footprint of your shoe Reliable Performance: - Three low-friction, fully sealed cartridge bearings and one igus bushing with a custom radial seal protect internal components against trail debris for riding in all conditions. Tapered Edges: - Large, tapered leading edge to deflect pedal strikes on rocky, rooty terrain Two sizes: - Large: 112mm x 106mm - 384g - Small: 105mm x 99mm - 373g Each size is proportionally scaled to match the silhouette of your shoe based on foot size or pedal size preference.

The SUMO III is CNC machined from thick 6061 Aluminum with a simple and super-strong design. - Includes sprocket guard - Material: Aluminum - Chain Width: 1/8" - Bore: 24mm - Weight (oz): 2.3 - Thickness: 6 mm - Tooth Count: 25 teeth - Interface: Bolt Drive

Keeping it creepy and kooky, and all together ooky! Witchy eyeballs soar among black bats on white crew socks for a unique Halloween sock your friends have never seen. Product Features: - Ultra-wicking acrylic base with superior softness and stretch to eliminate hot spots and blisters. - Mesh upper for ultimate airflow. - Exclusive Easy-Fit cuff never falls down. - Unique Stretch-to-Fit sizing system for a perfect fit on a wide range of foot sizes. - Off-beat, original designs only SockGuy can provide! - Cuff Height : 6" - Made with : Micro-Denier Acrylic - Style : Crew

Triathlon. Time Trial. Cyclocross. Some disciplines are made for 1x. And while SRAM's X-Range 2x set up has integrated much of the simplicity of a 1x system, there are still times when a single ring is best. The SRAM RED 1 crankset offers the most demanding racers the right mix of features—aerodynamics, durability, and simplicity. - Single-ring drivetrain simplifies functionality and reduces weight - 48 and 50t variants feature direct mount aero chainrings for better aerodynamics - Non-aero chainrings can be installed with a single tool, making gearing changes a breeze - SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control - Laser-etched chainring finish is more durable - DUB bottom bracket adds durability and simplicity - Can be upgraded to a power meter - Version: D1

Premium performance at down-to-earth prices. Judy now includes all of the 30mm MTB and E-MTB forks, with axle and steerer options to match any spec. Gold level gives you aluminum upper tubes and Motion Control damping. Features - New graphics package with E-MTB endorsement option (15x110mm) - Motion Control damping featuring low-speed compression adjustment to lockout - Fits Tires up to 2.8" - Fast Black finished 30mm aluminum upper tubes couple stiffness and lightweight with a premium look - Highly tunable Solo Air spring

The Cult Vans grips feature a classic Vans waffle pattern and are made by ODI in the USA using their proprietary rubber compound. - Made in the USA by ODI - Length: 150mm

Ride longer, ride farther with the eeSilk Carbon premium suspension seatpost. The eeSilk carbon is comparable in weight to traditional rigid performance seatposts while offering 20mm of vertical compliance improving control on rough surfaces and reducing fatigue on long rides. These posts make great enhancements to endurance road bikes by reducing the chatter transmitted from the surface to the rider and can be tuned to rider weight through a simple elastomer change. #5 elastomer comes pre-installed, other weight elastomers sold separately - Travel: 20mm - Length: 350mm - Weight: 295g (eeSilk Carbon 27.2) - Max Rider Weight: 250 lbs. - Offset: 8mm

Mountain bike tires: there's a new boss in town. Serfas' Sheriff tire is made from a long-wearing rubber compound and features a great small-knob tread pattern to give you traction on paths, trails, and city streets as well.

TRP’s two-piece rotors offer superior heat dissipation due to the aluminum center as well as excellent stiffness to provide you with confidence in your braking and lighter weight in 180/203mm sizes. Two-piece is now combined with TRP’s new slotted rotor design now with a 2.3mm thickness for DHR and E-MTB only. Six recessed slots create channels to allow water, mud, and other debris trapped between the pad and rotor to escape under braking. When debris gets trapped between the pad and rotor braking power is dramatically reduced, these recessed slots maintain a more consistent brake feeling in mixed conditions.

These insulated softshell pants provide generous warmth for recreational winter activities with hidden ankle protection that offers a flattering boot-cut. - Drytex Mesh lining provides comfort and moisture evacuation - Lite Dexfil insulation for warmth - 2 front pockets with flap - Reflective accents - Waist with elastic at sides and belt loops allows you to wear your own belt and maintains fit without compromising ease of movement - Zip fly with snap and hook-and-eye closure

Here's a big basket to carry large loads. Sunlite's Rack Top Mesh Basket attaches to your rear rack (sold separately) and sports sturdy steel construction.

Wolf Tooth ShiftMounts are adapter mounts that allow you to integrate SRAM and Shimano shifters with several different brakes from Shimano, SRAM, and more. Handlebar space is prime real estate and the ShiftMount seamlessly integrates brakes and shifters for a clean look. - Designed to work with rear (right side) brakes and shifters - Consult the brake and shifter manufacturers to understand which mounting interface you have on your brakes and shifters - For handlebar clamp ShiftMounts tighten clamp bolt to 1-2 Nm max torque - 6061-T6 aluminum - MM-ISII is for a SRAM MatchMaker shifter mounting to a Shimano I-SPEC II brake - MM-ISII is compatible with M9020, M9000, M8000, M7000, and M6000 brake levers - MM-ISII is compatible with, but not designed for SRAM AXS because the shift lever will be further towards the end of the bar, or closer to the rider's hand than is ideal for most riders

- Pro bleed kit for mineral oil brakes - Includes 2 syringes/2 M4 fittings, bleed block, Torx tool, crowfoot

The Problem Solvers Steerer Tube Shims are for installing 1-1/8-inch diameter threadless stems on 1-inch diameter threadless forks. The shim is made of light, durable anodized aluminum and is chamfered on the ends for easy stem installation.

Louis Garneau's classic black cycling shorts are now offered for junior cyclists. The Boy's Request Promax cycling shorts are designed for optimal comfort. Signature Mat fabric is a 4-way stretchable high-performance spandex blend that provides a 50 UPF/SPF protection from the sun’s harmful rays. A Powerband compressive cuff reduces lower leg pressure and provides support without restricting circulation. The shorts are equipped with the Promax Flex chamois, a 4-way stretch pre-molded padding that provides a better fit while riding. Its high-density foam provides a better support and the seamless construction eliminates pinching points and chafing.

Wolf Tooth CenterLock Rotor Lockrings for securing centerlock rotors to centerlock hubs. Machined from 7075-T6 aluminum at Wolf Tooth in Minnesota, USA. - Compatible with 12mm, 15mm and 20mm thru axles and QR - Machined 7075-T6 aluminum - Durable anodized finish - Torque to 40Nm - Not compatible with 6-bolt rotors and hubs - Washer included

All of our Crew cuff socks are perfect for riding your bike on or off the road. We all know that. But they aren't just for riding. They are great for hiking, skating, boarding, on the lacrosse field and at work or just chillin'. They can be worn anywhere anytime. Put a pair on today and your feet will be happy and look fantastic! Like our entire line of performance socks, all of our crew socks are purpose-built and functionally fashionable. They include our "Stretch-to-Fit" sizing system and our exclusive "Easy-fit" cuff for a perfect fit every time on any foot. These features create superior softness and comfort to help eliminate blisters and hot spots. We also feature a double stitched heel & toe for added strength and durability. - Cuff Height : 6" - Made with : Micro-Denier Acrylic - Style : Flat-knit; Standard

- Flexible mesh back - Adjustable TPR strap - Anti-slip silicone on index and middle finger - Suede three-panel palm - Gel-padded palm - Microfiber nose

Get sharp, dependable, Exact Actuation shifting with SRAM's GX 2x10 Front Trigger Shifter. This left-side front shifter is compatible with SRAM's GX 2x10-speed components (sold separately) and brings championship technology to everyone. • Dedicated 2-speed front trigger shifter • Multi-position mounting • Aluminum pull lever • MatchMaker X compatible • Weight: 122 grams

- ISO Diameter: 559 / 26" MTN - ISO Width: 48mm, 49mm, 50mm, 51mm, 52mm, 53mm, 54mm - Labeled Size: 26 x 1.9-2.125 - Tube Compound: Butyl - Valve: Long Schrader - Valve Core: Removable - Valve Shaft: Smooth

Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.

GRIPDRY TECHNOLOGY IMPROVES STABILITY FOR CROSS-TRAINING Swiftwick FLITE XT is the most technologically advanced cross-training sock ever developed. Engineered to improve stability during fitness activities that require quick lateral transitions, FLITE XT incorporates Swiftwick's GripDry Fiber and AnkleLock Technology. GripDry was developed using an innovative grip fiber to prevent your foot from slipping inside your shoe, but Swiftwick didn't stop there. They blended it with their signature Olefin fiber to wick moisture and keep your feet dry. Then they took it one step further and added AnkleLock Technology, which offers extra support around the ankle during high-intensity training. Take FLITE, stability never felt so good. - GripDry Fiber prevents slipping inside your shoe - AnkleLock Technology provides targeted ankle support - Flex Channels improve range of motion and moisture control - Medium Cushion and Moderate Compression - 66% Nylon / 17% Polyester / 14% Olefin / 3% Spandex

Combining ergonomics, function, and sustainability, the GP1 BioKork has been a top-rated grip and a consumer favorite. The grip is made from 40% cork, sourced from sustainable forests in Portugal. This green, sustainable theme is echoed throughout the complete construction of the grip with an inner core made of a reinforced plastic utilizing natural fibers which makes up 20% of its mass. - Carbon bar compatible - Clamp: cold forged aluminium – 100% recyclable - Uses: mountain bike, touring, commuting

Sta-Tru Double Wall Front Wheels. - Hub/Brake Compatibility: Rim Brake - Wheel Size: 26-inch x 1 3/8 - ISO Diameter: 590 / 26 x 1 3/8-inch - Front Axle: 3/8-inch x 100mm - Valve: Schrader - Tire Type: Clincher

Our only non-slip on design, the FORTIS features a protective shell for abrasion resistance and Level 1 impact protection to stand up to all your particularly downhill riding needs. - Perforated neoprene chassis for breathability - Strategically placed perimeter embossed foam padding with ventilation - Dense forward-facing chassis for shield protection - Internal elastic flex joint maintains chassis compression during pedaling - Tacky silicone elastic webbing to prevent slippage - Hook-and-loop thigh and calf closures with security cinch - Pre-curved chassis for attack position - Fortified injection molded plastic shields - Impacted Tested with Level 1 Protection - CE EN 1621-1:2012 Level 1

This versatile flat-bar all-rounder can get your legs spinning and motivate you to be active every day. Commute to work, ride to class, find new adventures in your daily routine. With its lightweight ALUXX aluminum frame, upright positioning, and high-quality parts that give it a smooth, comfortable ride, the Escape Disc is totally versatile and totally fun to ride. It now features a high-quality alloy fork and innovative D-Fuse seatpost. Both are great for smoothing out rough roads, absorbing shocks and vibrations, and giving you a smoother, more comfortable ride. The disc brakes deliver powerful braking performance in dry or wet conditions, and the 700c wheels with Giant EasyRide Tubeless tires (on select models) keep you rolling with speed, efficiency, and a reduced risk of flats. As an added bonus, there's clearance for larger tires up to 45mm in width, which makes it easier to ride rougher roads. It comes with integrated mounts, so you can customize your ride with racks or fenders. Whatever road or path you choose, Escape Disc is ready to roll. Balanced and efficient Lightweight ALUXX frame, fast-rolling 700c wheels, and confident upright positioning offer a balanced, efficient ride quality. Versatile and capable Powerful disc brakes and a wide range of gears help you increase your speed and tackle hills with more control. Rugged reliability Puncture-resistant tires feature the Giant EasyRide Tubeless system (on select models). Integrated rack mounts make it easier to carry your daily essentials or load up for weekend adventures.

• Caliper brake mounts • 45mm rake • Chromoly construction • Threadless fork • 300mm steerer length