Your Search: "hat"

From loose snow to icy freeze-thaw and everything in between, Wrathchild craves the best and worst winter conditions. - XL Concave Studs - Deep lugs provide accelerating, braking, and cornering traction - Open tread pattern sheds snow - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss.

Who knows more about dog attacks that the mailman? Letter carriers have had to deal with aggressive dogs since Claudius Polonius was delivering rolls of parchment to citizens of the Roman Empire. So what do the experts use to repel dog attacks? Well, the U.S. Postal Service has been using Halt! Since 1966. You might say they have been conducting field tests for over forty years. Halt! Products use Capsaicin, a naturally occurring extract of peppers, which, when sprayed in a dog's face, causes only temporary, but extreme discomfort for the dog. Think of it as attitude re-adjustment. Halt! Stops dogs in their tracks, giving you time to move out of danger. Halt's pressurized spray is accurate up to 10 feet.

Why follow tracks when you can make your own? Experience the "Foot out, flat out" fun of fat biking in any seasons. Whether you're tackling fresh snow pack or drifty sand dunes for days, the new Yukon will keep you rallying your favorite terrain in a whole new way.

Why follow tracks when you can make your own? Experience the "Foot out, flat out" fun of fat biking in any seasons. Whether you're tackling fresh snow pack or drifty sand dunes for days, the new Yukon will keep you rallying your favorite terrain in a whole new way.

Wrathlorde is an extreme-conditions fat bike tire designed for ultimate traction on challenging surfaces. Aggressive, tightly-spaced lugs decrease rolling resistance without compromising on traction, while 300 XL concave studs bite into ice for complete confidence. - 120 TPI tubeless-ready casing - Aggressive, tightly spaced center lugs with siping for a blend of rolling speed and traction - Tall side lugs for traction in corners - 300 XL Concave Studs for ultimate traction on ice - Always check with your rim manufacturer to verify rim & tire compatibility before assembly or use

For Kenda's first foray into fat tires, we looked at our fattest off road tires—motorcycle. Inspired by the championship winning Millville 2 tire for grip in any environment and featuring multiple sizes with tread heights optimized for maximum performance. The Juggernaut is an unstoppable force, is there more we need to say? - Sub 900 gram weight for the Pro 26x4.00 - Large casing for better flotation in snow - Front and Rear application

- Pedal Weight (pair): 377g - Cleat Weight (pair): 64g - Size: 68 x 84 x 17 mm - Body Material: Aluminum extruded / CNC machined - Spindle: CNC machined cr-moly - Pedal Bearings: Sealed bearings / IGUS bushings - Cleat System: X1 / X2 (HT exclusive system) - Pins: replaceable SP7 (M4 x 6mm) pins

- Pedal Weight (pair): 476g - Cleat Weight (pair): 64g - Size: 85 X 94 X 14 mm - Body Material: aluminum extruded / CNC machined - Spindle: CNC machined cr-moly - Pedal Bearings: sealed bearings / IGUS bushings - Cleat System: X1 / X1F (HT exclusive system) - Pins: replaceable SP7 (M4 x 6mm) pins

- Pedal Weight: (pair) 377g - Cleat Weight: (pair) 64g - Size: 68 x 84 x 17 mm - Body Material: aluminum extruded / CNC machined - Spindle: CNC machined cr-moly - Pedal Bearings: sealed bearings / IGUS bushings - Cleat System: X1 / X1F (HT exclusive system) - Pins: replaceable SP7 (M4 x 6mm) pins

- Pedal Weight: (pair) 305g - Cleat Weight: (pair) 64g - Size: 56 x 41 x 17.5 mm - Body Material: aluminum extruded / CNC machined - Spindle: CNC machined cr-moly - Pedal Bearings: sealed bearings / IGUS bushings - Cleat System: X1E / X1 (HT exclusive system)

PA12A pedals feature a reinforced nylon composite body with replaceable grip pins and CNC machined chromoly spindle. - 2 x sealed bearings and DU bushings - Replaceable grip pins - Dimensions: 100 x 95 x 18 mm

- 2-sided clipless pedal ideal for BMX and gravity use - SX features fixed front springs for unparalleled spring tension eliminating unclipping under maximum load - Small platform extruded and CNC machined aluminum body - Sealed 686zz bearing and IGUS

From hardpack groomed trails to soft backcountry pursuits, Hüsker Dü’s 4.8 inch wide casing offers a huge footprint while maintaining rolling efficiency for the best balance of speed and float. Built around the perfect balance of low rolling resistance, traction and flotation, shorter center treads roll faster, and slightly taller shoulder knobs give more bite when cornering. An overall reduced lug count, combined with a tubeless-ready bead make the 4.8” Hüsker Dü a great option for any winter fat bike adventure. - 4.8” casing offers the most float of any 45NRTH tire - Ideal for loose conditions at low pressure - Reduced lug count for rolling efficiency on harder packed trails - Tall shoulder lugs increase cornering traction

The cross-country rocket combines speed and cornering control at the highest possible level. An excellent all-rounder for racetracks. Ultralight with 127-EPI-Evo-carcass. Tread design: Balanced proportion between stable studs and sufficient gaps for excellent rolling characteristics and amazing self-cleaning properties. 27.5+ versions with additional stud rows. - Addix Speedgrip: The universal compound. It definitely has the widest range of use. Perfect for XC, AM, and Trail: for the majority of EVO tires there’s a version with ADDIX Speedgrip! It replaces the previous PaceStar compound where a significant, though not the only difference, during extensive use is more mileage and a longer life. - Addix Speed is the compound for XC race specialists. There’s only one thing that ADDIX Speed really loves and that’s speed. So the rolling resistance has been chopped yet again. It’s lower than the previous PaceStar, but at the same time, ADDIX Speed is more durable and more resilient. - SnakeSkin: The monofile SnakeSkin fabric on the sidewall makes the tubeless conversion for the MTB extremely easy and safe. It also provides the best cut protection on the side wall. - LiteSkin: The lightest option. LiteSkin MTB tires forego SnakeSkin but still have high-pressure resistant tire beads. If you don't mind the extra effort, these tires can also be converted to Tubeless by using a liquid sealant.

Flowbeist attacks groomed single track with confidence thanks to an ultra-aggressive tread that’s ready for whatever the trail throws at it. Designed for optimal use as a front tire, its wide 4.6” footprint floats well, rolls fast and is compatible with a wide range of frames and forks. Digging into berms brings the Flowbeist alive as its tall side lugs with softer compound rubber claw the snow. Hit the brakes on tight twisty single track and the aggressive tread design digs in to keep you and your bike in control. Pair Flowbeist with its sibling rear tire, Dunderbeist, for the ultimate combination of traction and control. - 4.6” footprint - Designed for optimal use as a front tire - Aggressive side lugs comprised of soft rubber compound - Ideally paired with Dunderbeist rear tire

Vanhelga is a fat bike tire designed for trail riding in loose snow. It brings traction to a new level with dual-compound rubber, triple-siped shoulder knobs, and an open tread pattern that sheds snow. Vanhelga sheds snow and tracks flawlessly when the trail becomes soft and sloppy. - 120 TPI tubeless-ready casing - Ramped center lugs for rolling efficiency - Aggressively siping for grip - Shovel-design side lugs for predictable braking and cornering - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to premature casing wear and stud loss. - Always check with your rim manufacturer to verify rim & tire compatibility before assembly or use

Dillinger 4 is a fast traction studded fat bike tire. The tightly spaced center tread rolls quickly, while taller, braced side lugs improve cornering in snowy conditions. Carefully positioned studs allow for railing icy, off-camber singletrack with confidence and control. - Braced side lugs for improved cornering - Directional center lugs for rolling speed and braking traction - Replacement studs and stud insertion tool sold separately - Custom studdable up to 252 studs - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss. - Always check with your rim manufacturer to verify rim & tire compatibility before assembly or use

This deep-winter biking hat features a fleece top and an insulated ear-and-neck band to retain body heat. The ripstop outer fabric blocks wind and moisture, while the soft, foldable brim shields eyes from the sun. - Helmet-friendly design - 300 g low-profile fleece top - 80 g Primaloft insulation in the ear-and-neck band - Polyester ripstop outer fabric - Soft, foldable brim for packability

Add a pop of color to your Q logowear collection with this hat featuring an abstract rendering of our new logo. - One Size - Adjustable

This deep-winter biking hat features a fleece top and an insulated ear-and-neck band to retain body heat. The ripstop outer fabric blocks wind and moisture, while the soft, foldable brim shields eyes from the sun. - Helmet-friendly design - 300g low-profile fleece top - 80g Primaloft insulation in the ear-and-neck band - Polyester ripstop outer fabric - Soft, foldable brim for packability - 0°F (-18°C) to 15°F (-9°C) Comfort

The trucker hat is an indispensable part of any rider’s wardrobe. Whether you use it to keep your post-ride helmet hair in check or keep the sun out of your eyes while washing your bike in the yard, it’ll come through for you. - Cotton twill - Embroidered patch - Snap-back closure

This simple logo hat is a great way to keep the sun out of your eyes at outdoor industry events or cover up a bad case of helmet hair. - One Size - Adjustable

A little thicker than a traditional skull cap, yet small enough to still fit under your helmet, the Winter Skull Cap is the perfectly balanced head cover to provide serious heat savings during the cold winter months. - Fabric: Supra WindDry – 4-way stretch 3-ply softshell with breathable, windproof and warmth properties - Garment Feature Accessories: Ponytail opening at the back - Visibility Features: Reflective logo

Coming in classic black with a colorful rider icon up front and the All-City name on the back, the Parthenon party hat features an unstructured five-panel design and a comfortable curled bill. Toss it on for easy style and comfort between trims. - Adjustable snapback - One size fits most

Biking in the cold just got more comfortable: our Stovepipe cap protects against brutal windchill with a stretchy wind-proof shell fabric on the top and front. A soft Merino wool-blend fabric over the ears and on the back wicks moisture and helps regulate body temperature. The low-cut front covers the forehead, eliminating the cold gap between your eyewear and helmet. - Wind-blocking panels - Merino wool-blend lining for moisture-wicking - Long cut protects ears, neck, and forehead - Integrated eyewear slots - 3-panel design fits perfectly under helmets - 0°F (-18°C) TO 25°F (-4°C) COMFORT

Upgrade your mechanic uniform with this fashionable 6-panel flat bill hat, featuring an embroidered "It's a Great Day to Fix a Bike" hexagonal patch. 100% cotton 6-panel. - Standard size: 58 cm circumference - Extra large size: 61 cm circumference

Designed to pair with our lightweight apparel system and Ragnarok shoe, this winter bike hat serves as a liner layer to cover your head and ears on chilly days. The Merino wool blend fabric wicks moisture to keep you dry, and the flat-seam construction makes for a comfortable, helmet-friendly fit. - Merino wool-blend fabric throughout - Flat-seam construction - Helmet-friendly - 45°F+ (7°C+) COMFORT

- Size: 26 x 4.0 - Single wall construction - Non-machined sidewall - Color: Black - Drilling: 32 - ERD: 536 - Width: 60mm - Depth: 24.5

• Size: 26 x 4.0 • ISO: 559 • Double Wall Construction • Non-machined Side Wall • Color: Black • Drill: 36 • Weight: 1,579 grams • Width: 100mm • Rim depth: 29.5mm

• Size: 26 x 4.0 • Double wall construction • Non-machined sidewall • Color: Black • Drilling: 32 or 36 • ERD: 534 • Width: 80mm • Depth: 24.5 • Weight: 1,310 grams (32-hole), 1,294 grams (36-hole)