Write a Review

The ARC 1400 DiCut wheels also benefit from the AERO+ profile supporting safe riding in the aero position through optimal aerodynamics. The combination of new and proven aero components allows cyclists to control many riding situations at high speeds. - AERO+ optimized rims by Swiss Side - Stainless steel bearings

- Lever Internals Gen 2 Guide R/RE/DB5|Code R Qty 1

Our 2437 open bore adapter is used to press 24x37 sealed bearings into bottom bracket cups, and direct fit frames like trek BB90. The adapter is machined with one step at 24mm ID, which fits into the center of the sealed bearing. - Installs: 24x37 bearing - Inner step outer diameter: 23. 8mm - Outer diameter: 36. 8mm - Thru hole diameter: 0. 387" (9. 8mm) - Inner hole sized to fit 1/2" threaded rod - Compatible with BP0006, BP0007 - Machined, red anodized aluminum - Sold individually (2 drifts required for some installations)

A classic MTB tire with large, widely spaced knobs suitable for all conditions. - ISO: 507 - Bead: Wire - PSI: 65

Built with a lightweight ALUXX aluminum frameset and FlexPoint single-pivot rear suspension setup, Stance is a great way to improve your trail riding. Its 27.5+ wheel and tire compatibility give it a plush ride quality that soaks up bumps and adds more traction and stability. Combined with 120mm of smooth suspension travel front and rear, it's a confident ride that will have you nailing new lines.

- Simple and reliable square taper bottom bracket - Replaces both BB-UN26 and BB-UN55 - Sealed cartridge bearings - Cr-Mo axle - For bicycles equipped with a chain case, select BB-UN300-K - For E-type front derailleur compatibility, choose BB-UN300-E - Fixing bolts not included; Shimano FC-E6000 bolts suggested

Why We Make This: The simple answer is that many contemporary bicycle frame designs call for the headset bearings to ride inside the frame’s headtube. After decades of making press-in bearing headsets, we needed to make headsets that worked in these newer frames. From the beginning we understood that integrated headsets posed a unique challenge in that the bearings are not pressed into a cup and sit loosely in the frame. When bearings are not pressed securely into a cup they shift and move, rapidly losing preload. As preload drops, the bearings are more susceptible to creaking, damage, and failure. That’s a problem we know how to solve. Why You Want It: Enter, our patented GripLock™ bearing cap. The GripLock™ preloads the headset independently of clamping onto the steerer, so it retains preload far better than the competition and is impervious to the ill effects of load spikes from large hits and heavy braking. This means smoother steering, no more creaking, and a longer lasting headset. Our GripLock™ design also takes the guesswork out of preloading a headset, because the bearing preload force is independent of the clamping force. Our headsets can be preloaded to a torque spec. Compatible with Open, 3T, All City, Low, Cinelli, Lynskey, and more. - Engineered, manufactured and assembled in Portland, Oregon USA - King Lifetime Warranty - Legendary made-in-house bearings - Patented GripLock® retention design for dependable headset adjustment (US Patent 8662517) - 42mm 45x45 upper bearing for 2.8-3.0mm bearing ream depth. - 52mm 45x45 lower bearing - Compatible with our included baseplate and 45 degree integrated crown races

Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss Cartridge Bearing - 1728

The Shimano ST-EF505 series Shift/Brake levers combine Reach Adjust, EZ FIRE Plus shifting, and Optical Gear Display in a durable assembly. - Funnel bleeding for easier maintenance - Clean cable routing - Same braking power as the MT200 kit - High-efficiency cable - Integrates smoothly with three-finger alloy hydraulic brake lever - Clear shift response and light action shifting performance - Easy setup, simple control and stable brake performance for regular riders - Lighter operating force shifter with greater compatibility with internal cable frames - Ergonomic total-system design - BR-MT200 Post-mount caliper - Resin pads

ALLL-ROUND HELMET The Macator is a sporty entry-level helmet for cyclists looking for an outstanding all-round helmet. The Macator has not only a comfortable padding but also offers an excellent ventilation, and it comes in a variety of bright, highly-visible colors. In-Mold: Lightweight, durable helmet with a long-lasting combination of EPS core and Polycarbonate shell - Bug mesh: Full protection from insects - Ponytail compatibility: Perfect fit for people with long hair - Full-ring: Adjustable ring connected to adjustment system enclosing all of the head - Excellent ventilation with 5 air inlets and 8 air outlets - Zoom Ace: Finely adjustable adjustment system with handy adjustment wheel for customizable fit

Designed for our professional athletes, the Sidi Tiger 2S efficiently transfers all the power you can unleash while maintaining a high level of comfort, allowing you to focus entirely on the course. The Tecno 3 closure is strategically placed to prevent contact with other riders in crowded situations. The upper is made of Bioveg material derived from recycled microfibers with a plant based external finish. The MTB SRS Carbon sole harnesses the strength of interwoven carbon fibers for efficient energy transfer and its SRS technology allows riders to maintain maximum grip level at all times. -The Tecno-3 Push Flex completely eliminates the pressure zone on the instep and significantly improves the comfort of the closure -Like most Sidi small parts, the Tecno-3 System is serviceable and replaceable -The adjustable heel retention device reinforces the top of the heel cup, closing the back of the shoe securely so the heel doesn't slide out during steep climbs or sprints -The all new Sidi Integrated Heel Cup is light, comfortable and reinforced to avoid deformation -Each side of the heel can be adjusted independently for a perfect fit -The upper part of the toe section is protected with anti-slip rubber to resist and deflect impacts from stones or debris when cycling -The MTB SRS Carbon-Ground Sole raises the standard for mountain bike performance, dropping around 100 grams per pair compared to the previous Dragon Carbon SRS sole without sacrificing power or durability -The MTB SRS Carbon-Ground Sole consists of replaceable tread blocks in the toe and heel attached to a medium-modulus carbon sole -The Ground SRS treads and MTB Plate are easily removable and replaceable and the sole is toe-spike compatible -To improve walkability, Sidi cycling shoes include a replaceable polyurethane heel pad

The Fatty Object CO2 inflator fits on both Presta and Schrader valves and its oversized control knob is easy to operate, even with gloves on. - Precision machined alloy parts - For use with both Presta and Schrader valves

Durafast Elite is a high-performance material designed to be fast enough for competition and tough enough for everyday training. Performance Cutoutfit design offers full-front coverage, thin straps with a cut out back and higher leg lines. - Durafast Elite antimicrobial fabric technology offers long lasting freshness, reduces odors, and prevents bacteria growth - Durafast Elite Suits are able to sustain 300+ hours of use - UV/SPF 50+ sun protection - 100% Chlorine proof - Fully lined

Thule's Thru-Axle Hitch Adapter enables you to attach a bicycle trailer conversion kit (sold separately) to bicycles with a rear thru-axle.

Kuat's NV 2.0 Base is loaded with features that make it one of the most equipped platform racks on the planet. This darkened brute features Kuat's foot lever pivot release, adjustable cradles for increased bike fit, integrated cable locks, a hand-tight cam system, and a ballistic black powder coat that will stand up to years of abuse. - Adjustable front tire cradle system - Re-designed pivot with optional foot assist - Fully integrated cable locks and hitch lock included - Front tire ratchet with an intuitive release - Rear tire strap features a co-molded strap to protect wheels - No-tool install with hand tight hitch cam system - Premium matte powder coat - 2 Bike capacity up to 60 lbs. each - Holds wheelbases up to 48-inch and tires as large as 4.8-inch - Available in both 2-inch & 1.25-inch hitch sizes - Dedicated 2-inch model is able to carry up to 4 bikes with optional NV Add-On 2.0 Base

This direct mount chainring coincides perfectly with the Comet Modular Crank. The megatooth design allows you to put all of your power through without worrying about dropping your chain. - Long tooth profile enhances chain retention - Thick-Thin tooth design for maximum chain engagement - Laser-etched logos

• Forged alloy construction • Single top bolt adjustment

Three protective layers: - Layer 1: DuraTx adds durability to pads and resists tearing or catching. - Layer 2: Body-mapped, impact-absorbing SmartFlex pads. - Layer 3: Soft inner foam keeps pads secure and comfortable - Knee sleeve has been extended with the additional protection on lower-shin - Adjustable fit-strap on knee guard for the perfect fit - Strap across forearm on elbow guard keeps pads in place - New high performance, extra-wide top gripper offers optimum level of pad security and a splash of color - Ventilated mesh back keeps the wearer cool and dry - Ultra-comfortable double-knit compression fabric for extra protection - Seam-reinforced binding to improve durability - CE-1621-1 certification - Machine washable

CN-E8000-11 Super Narrow SIL-TEC HG-X11 Chain (11-speed) FEATURE close - Special surface treatment on “pin and roller link plate” BENEFIT close - Durability improved by 50% or more (vs. CN-HG701-11)

When you absolutely, positively need to be seen, day or night, rain or shine, trust CatEye's brightest rear safety light. The ViZ450 features 5 LEDs, 300-degree visibility, OptiCube lens technology, and makes sure you stand out with the power of Daytime Hyperflash mode. - 5 LEDs (450 lm) - Highly visible during daytime - 300 degree visibility - Long rear beam projection - OptiCube lens technology - Lithium-ion rechargeable battery - USB rechargeable (Micro-USB cable included) - Low battery indicator - 4 modes *Charging time: 3.5h - Mode memory function - Battery Auto Save (The mode automatically changes to flashing when the battery power gets low.) - New seat post bracket SP-15 which fits contemporary (kammtail) aero seatpost - Snap System Run time: - Constant (40 lumens):5 hrs - Flashing (40 lumens):65 hrs - Group Ride (130 lumens):10 hrs - Daytime Hyperflash (450 lumens):14 hrs

A traditional Tri Comfort waist ensures minimum pressure on the belly during the effort. Two extra angled back pockets offer plenty of storage for bars and gels while preventing any loss during the race thanks to a tight elastic opening. These pockets also make the Women's Vent Tri Shorts a perfect choice if you like to run with a singlet during hot summer days. The new women's Tri Air 2 chamois offers more padding in the front area for maximum comfort when riding in the aero position. Technical Details: - Fit Tech: Standard - Fabric: 3Edges: Jacquard dimpled mesh structure that enhances ventilation and breathability. Highlander Mesh: Designed for maximum moisture vapor transfer (MVT), which helps prevent overheating from exercise by venting moisture vapor build-up - Fabric Technology: Chlorine-resistant - Chamois: TriAir 2 - Inseam: 6" / 15cm - Leg Finish: Lazer-finished at thighs - Pockets: 2 angled rear pockets - Sun Protection: UPF/SPF 50 - Visibility Features: Reflective logo, reflective trim - Waist: HugFit waist

- Easy to apply: Simply peel off and install - Ultra-Tough Cube-Tec protection shields against chain slap, scratches, scuffs, stone chips, cable rub and other damage to your chainstays - Durable, weatherproof 3M adhesive - 20-piece pack is designed to fit chain stays and rear stays on most bikes

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA

• 6/7/8-speed MTB crankset • Square taper interface • Alloy arms • Replaceable steel chainrings • Does not include BB • Bolt Pattern: 104/64 x 4-bolt

Origin-8's Pro Urban Riser Handlebar is a wonderful ride companion. It's crafted from lightweight, durable 6061-T6 aluminum and delivers a heads-up 50mm rise that's great for keeping an eye on your surroundings. At a skinny 560mm wide, you'll have no trouble picking your way through town. And, it comes in a variety of colors to make sure your ride is the sharpest on the block.

The SES AR Handlebar reveals our vision for the future of road handlebar shaping and design. Purpose-built for the modern road rider, the SES AR handlebar features compound flared drops for confident handling, aerodynamic shaping with internal/external routing options for clean airflow and aesthetics, and a carbon laminate that has been tuned for responsive handling without sacrificing comfort. - Application: Road Race, All-Road, Gravel, Cyclocross - Sizes: 38cm, 40cm, 42cm, 44cm, 46cm - Weights: 243g, 245g, 248g, 262g, 280g - Full Integrated Internal or External Routing - Lifetime Incident Protection and 5 Year Factory Warranty

Shimano's Tiagra Front Derailleur (3x10-speed) is sleek, balanced and consistent. The Tiagra 4700 series provides serious entry-level riding performance with cascaded technology from the top shelf Dura Ace line. - Model Number: FD-4703 - Series: Tiagra - Cassette Compatibility: 10 - Top Gear Teeth: 50T - Maximum Capacity: 20T - Chain Stay Angle: 63-66 - Chain Line: 45 - Band Mount: 28.6mm / 31.8mm (w/AdapterS) 34.9mm

- For Trail and Cross Country - Extremely versatile all-round tire - Has larger side lugs for cornering performance - Fast rolling and lots of traction - Available in Super Ground, Super Trail, and Twinskin construction - Available in Addix Speedgrip, Addix Performance, and Addix Super Race compounds

These insulated softshell pants provide generous warmth for recreational winter activities with hidden ankle protection that offers a flattering boot-cut. - Drytex Mesh lining provides comfort and moisture evacuation - Lite Dexfil insulation for warmth - 2 front pockets with flap - Reflective accents - Waist with elastic at sides and belt loops allows you to wear your own belt and maintains fit without compromising ease of movement - Zip fly with snap and hook-and-eye closure

- Size: 700c x 23 – 25 - ISO Diameter: 622 / road / 29" - ISO Width: 23mm, 24mm, 25mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 92g (32mm), 94g (48mm), 96g (60mm), 98g (80mm)