Wheels

- Plastic spoke covers in a variety of colors - 300mm cut to fit length - 36 pieces - enough for one wheel - Increases visibility and demands attention

No words needed. Just google "EX 471 Leogang World Cup". Let your muscles play on the uphills and switch to attack mode for the downhills. This is exactly what the DT Swiss Enduro rims are made for. Each rim is a piece of high precision engineering and, thanks to the extremely resistant alloy, the EX 471 can cope with the most demanding trails.

Zipp's 3ZERO MOTO carbon 27.5 and 29 enduro/trail wheelset is inspired by moto to provide riders with the control and durability required for pure trail speed. Already this wheelset and its MOTO Technology are proven with multiple victories in the Enduro World Series with our pioneering partnership with Lapierre Zipp Collective. While other wheel brands limit their focus to traditional box-section rim designs, Zipp engineers-uninhibited by legacy technology-took a different approach. They looked to motorsports as a model. Zipp's Moto Technology's single-wall rim is the optimal approach for an enduro/trail wheelset. The resulting rim provides something we call "ankle compliance." Imagine a runner rounding a sharp turn, the ankle naturally flexing to maintain grip as the runner leans. The 3ZERO rim can locally flex to stay parallel to the ground during cornering, increasing traction like a human ankle adjusts while running. This ability to twist locally allows it to deflect during single bead impacts without the rider getting bounced offline. 3ZERO MOTO helps you take the most direct route, saving seconds when and where they count most. At the center of the 3ZERO MOTO is the ZM2 hubset. This German-engineered hubset features 12 pawls and 132 points of engagement for a quicker response. The hub's improved seal design means better durability on rough terrain. Quarq's TireWiz is an add-on option for 3ZERO to dial in your pressure for an even more compliant ride. Zipp's Speed Line graphics give you the choice of five colors for a wheel with high-performance aesthetics. - Higher impact resistance - Reduced chance of pinch flatting - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Reduced rider fatigue - Frustration-free tire installation - Rim is designed for compliance, creating the feel of extra suspension - German-engineered hubset features 12 pawls and 132 points of engagement for quicker response and also has improved durability - Lifetime Warranty

Shimano XT M756 front hub. - Double contact sealing - Super polished bearing races for low friction rolling - Light alloy QR lever and nut - 6-bolt ISO disc mounting surface

Stan's No Tubes' Presta Removable Valve Core is a replacement valve core for Stan's No Tubes Presta valve stems and Presta valve equipped rim strips.

Product specs: - Size:24", 26" - Width:39mm - Bead width: 39mm - Inner bead width: 30mm - Section height: 27.5mm - Weight (26"): 760g - Sleeved or welded - Hole count: 32, 36

Zipp's 3ZERO MOTO carbon 29 enduro/trail wheelset is inspired by moto to provide riders with the control and durability required for pure trail speed. This wheel and its MOTO Technology have already been proven by multiple victories in the Enduro World Series with our pioneering partnership with the Lapierre Zipp Collective. While other wheel brands limit their focus to traditional box-section rim designs, Zipp engineers—uninhibited by legacy technology—took a different approach. They looked to motorsports as a model. Zipp's Moto Technology's single-wall rim is the optimal approach for an enduro/trail wheelset. The resulting rim provides something we call "ankle compliance." Imagine a runner rounding a sharp turn, the ankle naturally flexing to maintain grip as the runner leans. The 3ZERO rim can locally flex to stay parallel to the ground during cornering, increasing traction like a human ankle adjusts while running. This ability to twist locally allows it to deflect during single bead impacts without the rider getting bounced offline. 3ZERO MOTO helps you take the most direct route, saving seconds when and where they count most. At the center of the 3ZERO MOTO is the ZM2 hubset. This German-engineered hubset features 12 pawls and 132 points of engagement for a quicker response. The hub's improved seal design means better durability on rough terrain. Quarq's TireWiz is an add-on option for 3ZERO to dial in your pressure for an even more compliant ride. - Higher impact resistance - Reduced chance of pinch flatting - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Reduced rider fatigue - Frustration-free tire installation - Rim is designed for compliance, creating the feel of extra suspension - German-engineered hubset features 12 pawls and 132 points of engagement for quicker response and also has improved durability - Lifetime Warranty

A hookless bead and precision reinforced carbon layup create an exceptionally strong structure with best-in-class weight. A 25mm inner rim width produces a more uniform tire shape and better handling. The innovative 60-tooth ratchet freehub and ultrasmooth ceramic bearings deliver a responsive feel, while high-tensile-strength carbon spokes and Dynamic Balanced Lacing boost lateral stiffness. It all adds up to class-leading speed, efficiency and durability for superior all-road performance.

Compatible with all Presta pump heads and most sealant injectors, Fillmore is backward-compatible with whatever you got, and forward-thinking in every way. Made for mountain, gravel and 'cross rims up to 28mm deep, Fillmore is one of those upgrades you don't know you need until you try it. - Airflow - 3 times standard Presta air flow, easing tubeless tire set-up and reducing pumping force - No clogging - Patented poppet-style design eliminates clogging by shielding air hole from contact with sealant - Simplicity - Ability to inject sealant without removal of valve core simplifies maintenance - Adjustable - Micro-air adjustment feature allows for precise trail-side pressure changes

- Alloy 700c rims - Tubeless compatible using supplied rim strips and valves - 23mm wide rim for better tire performance - 30mm rim height - Stainless steel, straight pull, double butted spokes - Dynamic Balanced Lacing provides significantly higher transmission stiffness vs. traditionally laced wheels - Alloy locking nipples - Giant Alloy hub shell with pawl based driver - Centerlock disc compatible

The all-new CXR 2 gravel WheelSystem showcases Giant's prowess in building strong, lightweight carbon wheels. Through improved carbon layup, innovative hookless technology, and a large inner rim width that allows for wider tires and lower pressures, the CXR 2 is as strong as our XCR cross-country mountain bike wheel but at a much lighter weight. - Hookless rim design enhances overall durability and offers a wider inner rim width without adding weight - Optimized carbon layup features high-tensile strength carbon fiber placed at the most crucial structural points to provide stiff, compliant, and lightweight wheels - A 35mm all-round rim profile with a contemporary wider inner width (25mm) offers improved support for today's higher volume road and gravel tires

Your riding doesn’t need to stop when the weather gets cold. Features - Giant road thru-axle trainer axle - Alloy construction - For use on 2017+ Giant road bikes with a 142x12mm rear thru-axle

Zipp's 353 NSW Tubeless Disc-brake wheel is the pinnacle of our pursuit of versatility and speed. This wheel fuses Zipp's two most advanced approaches, Sawtooth rim profile and TSE, for an all-encompassing approach to performance. With its undulating 45mm-deep rim shape, the 353 NSW provides speed on every terrain with best-in-class aerodynamic efficiency and crosswind stability. The 353 NSW is Zipp's lightest tubeless wheelset yet, making it a fast-puncher ready to fight its way into the breakaway. Zipp's use of a hookless (straight side) rim in the 353 NSW is integral to achieving our mission of Making You Faster. With hookless, the transition between the tire and the rim is more seamless and aero. Zipp's hookless rims have more efficient resin distribution, which means lighter wheels. They also are highly durable. Zipp's 353 NSW's Sawtooth rim shape with Hyperfoils optimizes aerodynamic efficiency and crosswind stability. The Sawtooth design also allows the rim to be structurally strong but light. That will help you snap out of corners and maintain that speed no matter the terrain, especially in the steep, punchy stuff. The 353 NSW utilizes Zipp's Total System Efficiency, or TSE, approach to wheel design: overcoming specific barriers to speed: wind resistance, gravity, rolling resistance, and vibration losses. The wheel's 25mm internal width is ideal for running wider tubeless tires at reduced air pressure for a more efficient ride. At the center of the 353 NSW is the Cognition V2 Hubset, re-engineered with an updated Axial Clutch V2 mechanism for quicker engagement and lower friction, as well as improved durability. - Versatile endurance wheel for the modern road bike with tubeless and hookless rim profile - Our lightest tubeless wheel yet, making it a fast-puncher ready to fight - Optimized tire bed for easy tire installation - TSE for greater efficiency and reduced rolling resistance - Sawtooth rim with Hyperfoil nodes and HexFin ABLC dimple pattern for top aero and crosswind-stable performance with an undulating rim depth - Cognition V2 hubset rolls efficiently whether you are pedaling or coasting. Its Axial ClutchV2 technology reduces drag and lowers friction - Ships with 12mm end caps - Center Lock rotor interface. Lockring is included - Zipp graphics applied using Zipp's ImPress direct-print technology - Lifetime warranty

Hubs typically seem to fall into two general categories: light and very expensive or heavy and cheap. With this typical bike industry paradigm, we saw an opportunity. You see, for years we've been using high-end geared hubs from the manufacturer of our track offerings on our personal bikes. They are very lightweight (peep the specs) and just plain work. We decided to finally make those hubs available to you and corner the market in our own category: lightweight, affordable, and incredibly practical. We've ridden them on all kinds of bikes from the Electric Queen to the Mr. Pink and we're in love. They are reliable, dang light and very reasonably priced. We offer the Go-Devil in a minimal amount of configurations and ship them with all the necessary endcaps and a quick release skewer, future proofing them in case you want to use them on various bikes over the years. Quick Release lever and 12mm thru-axle endcaps are included. On all models we spec high-quality made in Japan stainless-steel sealed bearings. The splined freehubs have 28 points of engagement, the XD driver has 56. Oh, and we've got polished options as well. Kind of a big deal because polished hubs have become a rarity. - Weight: 277g - Includes 12mm thru-axle end caps and quick release skewer - Drive Side Center To Flange 18.5mm - Non-Drive Center to Flange 34mm - Non-Drive Flange Diameter 58mm - Drive Side Flange Diameter 49mm

The Muc-Off Tubeless Rim tape is made from their proprietary performance material with a pressure-sensitive adhesive to provide just the right amount stretch whilst maintaining durability and strength needed to create a lasting airtight seal. Semi-transparent material makes locating the valve hole easy.

Tannus Armour Tubeless inserts are the result of years of top level multi-cell foam manufacturing mixed with extensive professional riding experience. At the heart of Tannus is the patented Aither Technology; a multi-cell foam compound that forms the structure of the Armour. The inserts are designed to displace small impacts while offering a spring-like rebound for a smooth yet playful ride. - 3% Faster than standard tubeless - Flexible sidewall stabilizing "Wings" for smoother ride quality, with 50% more vibration damping - 20mm of rim protection - Not a sealant sponge – keeps sealant where it belongs - Easy Installation (5 Minutes, No tools required) - 150g - About as much as a standard tube (a little lighter)

Power up climbs. Descend with speed and confidence. Stiff, superlight, and built with proprietary technologies, the SLR 0 30 Disc delivers efficiency, control and durability in a stiff, lightweight and value-oriented package. Features - Ultralight 30mm deep full-composite disc brake only rims - Tubeless compatible using supplied rim strips and valves - 17mm internal rim width for optimal tire performance - Dynamic Balance Lacing technology for enhanced drive efficiency and braking control - Sapim straight-pull bladed stainless spokes- 21H Front & 24H Rear - Alloy locking nipples - Giant alloy hub shell, Centerlock Disc rotor mount and pawl based driver system - Includes end caps for the following configurations: - Rear: 142x12mm T/A - 1510g per pair

Spank's Spoon 32 rims are gravity rims done right! If your rides encompass big hits and fast descents then a pair of Spoon 32 rims might be just what you need to tackle your favored terrain. - Six Series aluminum alloy - Disc specific rim - Tubeless Ready

Sealed cartridge bearing High flange design w/cut outs 100mm OLD Lightweight, hollow, heat-treated axle Black, silver, or white 32 or 36-hole spoke drilling

- Aluminum hub body - Sealed bearings - 6-bolt disc rotor mount - 15mm thru axle - 78 x 15mm version: flush axle, no end caps

WTB's TCS AL valves are aluminum to shed grams, and come in catchy anodized red, black, or blue. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch. - Presta - 34mm

WTB's TCS AL valves are aluminum to shed grams, and come in catchy anodized red, black, or blue. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch. - Presta - 46mm

Odyssey racing spokes use butting dimensions that are tailor-made for BMX racing, and they’re still strong enough to handle some light street riding too. You’ll save roughly an ounce per wheel on 36’s. Only the best stainless steel has been used, and the gradual butting transitions are ideal for the stresses that a 20-inch wheel has to endure. - Proprietary professional-grade stainless steel. - BMX specific butting transition dimensions.

• Sealed cartridge bearings • High flange design • 120mm hub spacing • Aluminum hub body • Lightweight, hollow, heat-treated axle • Fix/freewheel hub threading • 32 and 26-hole spoke drilling • Bolt-on 3/8-inch axle • Black, silver, or white

- Straight gauge spokes with a proprietary grade of stainless steel that is as good or better than the materials used by the world’s most renowned spoke makers. - Sized and dimensioned specifically for BMX.

The Rampage rear wheel rolls on a four-bearing sealed freecoaster hub with 14mm chromoly axle. It's hand-laced to a 36-hole Rampage double-wall rim, and features a 9T chromoly driver with 3-pawl system. - Axle: 14mm chromoly (heat-treated) - Driver: 1-pc chromoly RHD or LHD - Hardware: Steel(17mm wheel nuts) - Hub shell bearings: 6002 (x1) & 7902 (x1) verify bearing number on side of rubber seal - Drilling: 36H - Weight: 46.4-ounces

The Rampage rear wheel rolls on a four-bearing sealed cassette hub with 14mm chromoly axle. It's hand-laced to a 36-hole Rampage double-wall rim, and features a 9T chromoly driver with 3-pawl system. - Axle: 14mm chromoly - Driver: 1-pc chromoly RHD, 9T - Driver Bearings: 6802 (x2), verify bearing number on side of rubber seal - Driver Pawls: 3 Pawl - Driver Spring: Wraparound (x1) - Hardware: Steel (17mm wheel nuts) - Hub Shell Bearings: 6902 (x2) verify bearing number on side of rubber seal - Drilling: 36H

Replacement Cassette body for Origin8 hubs

Simply replace the cones on your Supreme front and cassette hubs for a perfect fit without having to spread your dropouts. Available in front, rear, and drive side options. These guards now feature a heat-treated chromo insert for longer life.

These freehub bodies fit only the older Spoon hubs, not compatible with the new Oozy or Spike hubs.

- Flanged 15mm axle nuts - Durable chromoly construction - Spacing / Axle: B/O

- Axle adapters for CX/GX/MT-1110 Elite Series rear hubs - Available in standard QR and 12mm thru-axle options - Axles included with adapters - Material: Aly - Color: Blk

Did you trash the front bearings on your WeThePeople Arrow front hub? It happens, that just means you're riding a lot. Fear not, we've got you covered with this bearing set from WeThePeople.

Best value in quick-release disc wheels.

The best price on the market for a wheel meant to be ridden. Single-wall rims and loose-ball hubs that come out of the box round and true.

From Origin8 come these replacement hollow track axle sets for SS-1101 hubs.

- Flanged 15mm axle nuts - Durable chromoly construction - Spacing / Axle: B/O

Get your WeThePeople Arrow Front Hub Axle/Cone Set and freshen up that front end that's a little wobbly after that last time you cased it on the spine.

- Aluminum hubs - Loose ball - Bolt-on - Axle: B/O 3/8 - Material: Aly - Color: Blk - Brake Type: 6B - OLD: 170mm

- Replacement QR axles for Origin8 RD-1100 hubs

- Axle adapters for RD-1110 Elite Series front road disc hubs - Available in standard QR, 12mm, and 15mm thru-axle options

- Elite Series road hubs - Straight pull and J-bend spoke options - Sealed bearings Straight Pull Spoke: PCD-L: 30.3mm PCD-R: 30.3mm LTF-L: 13.1mm LTF-R: 13.1mm CTF-L: 36.9mm CTF-R: 36.9mm J-Bend Spoke: PCD-L: 31mm PCD-R: 31mm LTF-L: 10.78mm LTF-R: 10.78mm CTF-L: 39.22mm CTF-R: 39.22mm

- End cap adapters for Origin8 RD1120 series 11-speed road hubs

Replacement cassette bodies for Origin8 RD-1200 series rear hubs - Supplier Part: QA1R - Use: Shi 11s - Bearing Type: Sealed - Compatibility: RD-1200

- AL6061 alloy tubeless Presta valve - Includes 2 O-rings, one standard profile and one aero profile, for an airtight seal on any rim - Removable valve core for installing sealant - Additional replacement valve cores sold separately - Sold individually

Race Face Vault hub axle. Use it as a replacement axle or to convert your wheel to a different axle standard. - Light and strong alloy construction - Compatible with Race Face Vault hubs

- Asymmetric Bead Socket Technology brings Stan's legendary easy inflation and the most reliable airtight seal to wider, offset carbon rims - Custom carbon layup equalizes impact forces on both the long and short sides of the rim, making both stronger - Asymmetric rim shape with offset drilling improves bracing angle and balances spoke tension to create a stronger overall wheel - 250lb Recommended Maximum Rider Weight - 27.5": 420g, 29": 455g

- Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal. - 25mm width optimized for 40mm Gravel tires and up to 2.3" mountain tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed

V2 Tubeless valves are stronger, lighter, and even easier to use thanks to the machined aircraft grade 7075 aluminum and Muc-Off's new Tire Insert air ?ow system. The new design features six slots that are machined into the base of the valve stem, allows tubeless sealant ?uid and air to ?ow freely, even when running tubeless tire inserts. - 7075 Machined Aluminum valve stem and cap - Tire Insert air flow system keep air moving freely and compatible with most tire foam inserts - 4mm machined Allen Key slot for easy installation and removal - Includes Valve Core Removal Tool (integrated into spare alloy cap) - Supplied with various rubber bases to optimize fit with multiple rim types

- Lightweight 33mm deep aerodynamic carbon disc brake wheelset - Wind Tunnel Optimized rim profile, aerodynamic aluminum hubs and USB ceramic bearings for optimal performance in all conditions - 2-Way Fit tubeless-ready rims with 19mm internal width, optimized for use with wider tires - G3 spoke lacing front and rear for maximum power transfer and braking performance - Black-on-black Dark Label graphics - Only 1485g per pair

CNC machined from 6061-T6 aluminum alloy, Box One Schrader Valve Caps add a touch of style to any bike. Available in anodized red, blue, and black with laser-etched Box logos.

- Campagnolo's first dedicated gravel wheel - UD carbon fiber with laquerless finish, ASTM 2 & DIN EN 17406 Category 2 certified - Proprietary 2-way fit technology, no need for tubeless tape - Asymmetrical rim profile with mini-hook to sustain higher pressures on smaller tires, 25mm internal width can handle 38mm up to 76mm tires - 1485g wheelset weight, 120kg weight limit

Replacement Alloy HGR (HG-Road) Freehub Body, with Anti-Bite Technology, for all HEX Rear Hubs. Includes spacer ring to also allow the use of MTB cassettes. Compatible with: - All HEX J-Type, Straightpull, and Gravel rear wheels Not compatible with: - SPIKE/OOZY/SPOON hubs

CZR i30 wheels were designed to handle it all, which is why they feature a strategically reinforced carbon layup and are hand built using double-butted spokes, brass nipples and high-engagement hubs featuring top-tier bearings and oversized freehub seals to establish themselves as wheels that simply won't quit. Solid Strip & TCS Tape - Durable nylon strip that lies between the rim and tubeless tape to prevent tubeless tape from pushing into the spoke holes and ensures a smooth interface between the tire and rim. The smooth surface makes it easier to mount a tire by preventing air from escaping around the bead at each indent during inflation. Solid Strip also protects the airtight system from puncture in the case of a broken spoke. 3-Cross Lacing & Brass Nipples - Too many companies are trying to save weight by offering "enduro" wheels with 2-cross lacing patterns and inadequate alloy nipples. While those are suitable for XC and light trail usage, there's no replacement for the long-term reliability of a 3-cross lacing pattern with brass nipples holding it all together. Frequency Hub - The world's best carbon rims deserved to be paired with high-quality hubs that further improve the performance of a lightweight, dependable carbon wheelset. Frequency hubs feature a low-drag, 6-pawl design that alternates contact between two sets of 3-pawl groupings to provide a responsive 5 degrees of freehub engagement. Heavy-Duty Pawl Springs - CZR i30 wheels feature heavy-duty pawl springs that engage with greater force to counteract the additional torque caused by sudden cranking on steep trails. We also offer a Light Pawl-Spring Kit that can be purchased separately for CZR i30 riders who prefer a quieter hub with lighter pawl engagement. Usage: Trail, Enduro

The EC70 AX wheels connect EC70 carbon rims to our proven X5CL hub with 28 3x double butted Sapim straight pull spokes. End cap and axle components are available for all major industry standards. Wide, 24mm internal rims are optimized for gravel tires 35mm and larger, giving you a more confident tire stance for control on the ground during your expansive adventure rides, single track forays and unrelenting gravel races. Our Easton Overland team and SDG Muscle Monster team riders have put these wheels to the test, racing prototypes at DK200, with Amity Rockwell taking the DK Queen title and Amanda Nauman finishing 6th, while at Lost and Found 2019 Michael Van Den Ham came in 4th and Craig Richey took 6th.

- High-quality road hub with 1-piece forged and CNC machined alloy body - Sealed bearings for increased performance and contamination resistance - 7075AL machined axle Specifications: - Use: FT - Spacing / Axle: QR - Material: Alloy - Weight: 79g - Brake Type: RIM - Bearing Type: Sealed

HED's entire line of Big Deal fat rims can be purchased as a rim-only for the custom build of your dreams! Big Deal is 445 grams and 85mm-wide of pure fat-bike joy. This one-piece, full-carbon rim will change the way you ride. Big Deal utilizes a ribbed, single-wall design to maximize stiffness and minimize rotational weight…all on a tubeless-ready platform. Compared to most aluminum fat bike wheel/tire combinations in the market today, you can expect to lose 1.5 to 2 pounds… per wheel. Note that the Big Deal is drilled symmetrically ONLY and cannot accommodate offset frames. Big Deal utilizes Inflatobam, HED's patented tubeless technology for installing big tires. The twin channel rim design provides a better pre-inflation seal by trapping each tire bead against the rim. This drastically reduces the amount of air it takes to get the beads to “bam” into place. In conjunction with the rim shape, Inflatobam utilizes Inflatobands. These effectively provide a variable rim-channel diameter. This compensates for the discrepancies in tire bead diameters by minimizing the gap between the tire and the rim channels (the main source of air leaks). Once seated, the angled bead shelf prevents the tire from collapsing back into the rim at low pressure. Our interior surfacing and tight tolerances ensure no tire burp or slip. Also note that our rim shape does not require tire levers to remove and install tires. Inner tubes may be used, too. Additional Info - Rim Type: 85mm - Rim Material: Carbon - Rim Weight: 445g - Color: Twill Weave - Rim Hole Count: 32 - Drill Pattern: Symmetrical Only - Decal Type: White - MIN/MAX TIRE SIZE: 3.8 - 5.0" - Rim ERD: 564 (includes washer)

HED's entire line of Big Deal fat rims can now be purchased as a rim-only for the custom build of your dreams. Our demanding, discerning, and fat-loving customers have spoken: They love our Big Deal carbon rims. Nothing else offers the same combination of easy tubeless setup, stiffness, and jaw-dropping weight savings. They're utterly fat-tastic. In an effort to bring the advantages of Big Deal technology to an even wider audience, our engineers worked hard to apply the same principles to an aluminum platform. Enter: the Big Aluminum Deal and Big Half Aluminum Deal. At 80mm wide, these rims offer superb fit with all common fat bike tire sizes. They have the same patented Inflatobam tubeless technology as their carbon brethren - saving over a pound in inner tubes alone. What's the difference between the B.A.D. and the B.H.A.D.? Only the rim diameter. The B.A.D. has a 26" diameter, while the B.H.A.D. is made for larger 27.5" fat bike tires. Additional Info - Rim Type: Tubeless-Ready Clincher - Rim Width: 80mm - Rim Material: 6061 Aluminum - Rim Weight: 695g - Color: Black - Rim Hole Count: 32 - MIN/MAX TIRE SIZE: 3.8 - 5.0" - Drill Pattern: Symmetrical Only - Decal Type: Shadow - Rim ERD: 586 (27.5"), 562mm (26"), 510mm (24")

Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.

After years of mountain biking with thru-axles with bulky handles that seemed to strike every trailside obstacle, we needed a better option. Our Lightning Bolt-On thru axles offer a high-quality, simple, lightweight alternative to that bulky handle. Available in a range of sizes that fit both front and rear wheels on all types of thru-axle-equipped bikes. - Lightning is Better—Our front and rear Lightning Bolt-On axles offer a stronger, more durable, lower profile, and lighter weight option to replace your stock thru-axles. - Low Profile—No more bulky handles to strike trail obstacles. Aerodynamic design. - Light Weight—Our axles are internally bored to remove unnecessary material without compromising strength. - Easy to install—Our matching front and rear Lightning Bolt-On Axles require only a standard 6mm hex wrench for easy installation and removal. - Better Tolerances—Manufactured in the USA to the tightest tolerances using aerospace materials and CNC manufacturing. No longer will your axle loosen while riding.