Write a Review

Designed to be worn on the bike or off, the versatile Mixie Skirt provides lots of options, comes in custom prints and is also available in solid black. The beauty is that it pulls on easily over the hips and can be carried in a bike bag for post ride activities. Pair this up with our Mixie Liner in coordinating prints. - 92% polyester/8% spandex - wide, pull-on waistband - wrap-style skirt that opens at left side for pedaling freedom - 15 inch front length; 16.5 inch back length (size M) - Breathable - Moisture Wicking

- 10-speed cassette sprocket - Offers a wide range of gearing options. - Lightweight sprocket carrier, it delivers smooth gear steps and precise shifting. - Ride anywhere with smooth and precise HG shifting

For use with 2000+ Hayes 74mm eye-to-eye calipers (adapters/calipers for 22mm mounts are no longer available) - (IS) International Standard 51mm tabs; (QR) Quick Release; (TA) thru-axle - Note: Fox-36/40 (thru-axle), Rock Shox Pike (Maxle), and Psylo (Tullio) axle forks use IS-QR adapters

Built with a lightweight ALUXX aluminum frameset and FlexPoint single-pivot rear suspension setup, Stance is a great way to improve your trail riding. Its 27.5+ wheel and tire compatibility give it a plush ride quality that soaks up bumps and adds more traction and stability. Combined with 120mm of smooth suspension travel front and rear, it's a confident ride that will have you nailing new lines.

Shimano Dura-Ace BB92, BB9000 Hollowtech II Bottom Brackets

New Super Record 12 Speed sprocket cassettes: innovation which gives the user great advantages, thanks to the matching dimensions and complete compatibility with wheels and frames. The rider has always been Campagnolo’s focus, and the goal has always been facilitating their performance; making the impossible possible. Adding an additional sprocket might seem simple, however, we have not only succeeded in maintaining the same footprint, but also improving the component’s performance and durability, which was a tricky challenge! The new Super Record 12 Speed sprocket sets feature thinner sprockets, tighter spaces and space-saving dimensions that are the same as those of the 11 Speed sprockets, meeting everyone’s needs with just two (11:29; 11:32) cassettes. The addition of the twelfth sprocket allows a linear upshift or downshift by a single tooth, up to the seventh gear, allowing the cyclist to find the perfect ratio for any situation. In addition, the closer sprockets ensure faster, quieter and more precise shifting thanks to the special tooth design and surface treatment which guarantees a longer lifespan. The 6 larger sprockets are also available in two single-piece steel triplets, to avoid energy loss. Mounting the cassettes is easy thanks to matching-thickness spacers.

Origin-8's Alloy Classic Chainrings are CNC-machined in the USA out of tough, light and durable 6061-T6 aluminum and are compatible with road, fixie and track drivetrain components. They have an attractive and corrosion-resistant silver anodized finish.

- Steel cups - Steel retainer bearings - Available in chrome or black - S.H.I.S.: EC34/28.6-26tpi|EC34/30 - Steerer Dia: 28.6mm - Cup Dia: 34mm - Race Dia: 30mm - Stack Ht: 40mm Size: 1-1/8"

There are some chilly days when you know that a pair of shoe covers will be overkill, but you'd rather keep your toes warm and worry about riding instead. That's where these toe covers fit in. They will keep your feet warm on cold and dry days. - Cut-outs for all current pedal systems - Reflective details at front - Fabric with versatile, medium thermal protection - GORE WINDSTOPPER Product: totally windproof, extremely breathable and water repellent - Lightweight material for easy storage - Reflective transfer print to mark right and left

A tight and consistent 13-tooth gap between chainrings delivers accurate and dependable shifting and is the core of our X-Range gearing. Our smaller chainrings paired with wide-range, 10t-start cassettes provide more efficiency and more time in the big ring. It's modern gearing for today's riders. - Crisp and accurate front shifts - Durable finish - X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear

The Shimano HB-M525A hub is ideal for use with 6-bolt disc brake rotors and quick release dropouts. - Double contact sealing - Super polished bearing races for low friction rolling - 6-bolt ISO disc mounting surface

- Cloud 9 seat cover featuring comfortable memory foam - Adds a layer of protection and comfort to MTB or cruiser saddles

The uGrip BORDO 5700 Combo folding lock offers an outstanding level of protection. This folding lock meets all the safety requirements and also creates a coherent style: the uGrip BORDO 5700 Combo colors are a perfect match for those of the helmet models ABUS Pedelec and ABUS Urban-I 2.0 Neon. It's the ideal keyless companion for anyone in search of a coordinated look. - 5mm steel bars - Bars are linked with special rivets - Two-component molded digits guarantee life-long visibility - Individually settable code

Push the pace on climbs, let loose on the descents. This aluminum hardtail gives you a feel for the trail with balanced, confident handling and a plush suspension fork. Built on a lightweight ALUXX aluminum frame that features classic hardtail design and the balanced riding characteristics of either larger diameter 29-inch or 27.5-inch wheels, Talon is a great choice for XC and trail riding. The frame geometry is specifically designed to adapt to its respective wheel size and either an 80mm or 100mm suspension fork (depending on frame size). It's a confident ride that's perfect for ambitious riders who want to take their off-road skills to the next level. Wheel size: - Size X-Small: 27.5-inch - Sizes Small – Medium: 27.5-inch or 29-inch - Sizes Large – XX-Large: 29-inch

With its classic blend of high strength and low weight, Easton's EA50 stem is a smart choice for your favorite ride. It's made of 3D forged aluminum for amazing stiffness and strength. Easton's Top-Lock technology locks the stem and faceplate together, creating a highly rigid interface while minimizing the loads on the bolts, making the EA50 perfectly safe for carbon bars.

RockShox Bottomless Tokens allow riders to easily custom tune their RockShox fork’s air-spring performance to best match their own riding style and suspension preference.

- Steel 1/2 x 3/32 derailleur chain - For use with index shifting systems - For 7-/8-speed drivetrains - 300 grams - 132-link chain is extra long for bicycles like foot-forward-design cruisers

Many top features are packed into the Centaur crankset. The four-arm design allows for independent bolt circles, offering greater stiffness and structural integrity, and also provides additional versatility, as a single crankset is compatible with both standard compact and semi-compact chainrings. Add these features to the first aluminium crankset with an Ultra-Torque axle and the result is a component that is very similar to the top-of-the range part. - Requires use of Ultra-Torque bottom bracket cups-Double standardized bolt circle diameter allows for use of standard, mid-compact and compact chainrings - Ultra-Torque axles couple together in the middle of the BB shell via a Hirth Joint that self centers the crank. This results in a very light weight and stiff system that transfers power to the pedals without power loss - Features Campagnolo X.P.S.S. (eXtreme Performance Shifting System) featuring geometrically optimized chainring teeth. Optimized when mated to a full Campagnolo drivetrain - Ultra-Torque system have both drive and non-drive side bearings pre-installed

- Great for storage or transportation - Alloy construction - Can be mounted vertically or horizontally

eeSilk Stem is a fatigue-reducing compliance stem that noticeably reduces vibrations on variable surfaces. With up to 20mm of tunable compliance, an easy single bolt external elastomer change and a soft/firm compliance switch – the eeSilk Stem makes any road, no matter the terrain, smoother. - Weight: 225g - 235g - Angle: -6° (only) - Stack Height: 49mm - Stem Clamp: 31.8mm

Thomson Covert Elite Dropper Seatpost-31.6 150mm Black Internal. We've set the bar with the Thomson covert black dropper post. It's designed around internal routing for clean installation and an updated shift style remote lever for effortless operation. The Thomson Covert Dropper includes a new shifter oriented remote lever for easy operation. The cartridge-based system is designed to have the longest service life in the industry. If repair is needed, it's fast, affordable, and simple. Every part that makes up the Covert dropper is carefully chosen, and of the highest grade quality available. - Custom made Norglide bearing bushings and Trelleborg O-Rings and seals - Thomson saddle clamps and fasteners - Motul Oil for durability and precision quality. - The return speed is damped in the last 15mm of upward travel to be gentle on your seating area. - 60mm (Ø27.2 only), 100mm, 125mm, 150mm of infinite travel. - Passes ISO 4210 fatigue and strength tests for seat posts.

Stare down rough terrain with this burly yet sleek tire. The Utility Player offers comfortable off-road exploration with modern, openly spaced treads and wide 2.25-inch casing. A broad spectrum of diameters gives you choice for fit. You still standing there? - Always check with your rim manufacturer to verify rim & tire compatibility before assembly or use

Featuring silky smooth travel in a new lightweight design, Monarch floats through bumps even better than before, turning rugged trails into tire-gripping velvet. The chassis is lean while maintaining the durability and adjustability needed to bite off huge chunks of burly trail action and epic cross country. - WEIGHT: 215g - DAMPING: External rebound, 3 position compression (Open/Pedal/Lock) - CONFIGURATIONS: 152x31mm, 165x38mm, 184x44mm, 190x51mm, 200x51mm, 200x57mm, 216x63mm - REBOUND DAMPING: Rapid Recovery - SPRING: Standard, High Volume, Standard with High Volume Eyelet, High Volume with High Volume Eyelet, DebonAir - SPRING ADJUST: Air pressure via single schrader valve - SHAFT MATERIAL: 7075 aluminum - SHAFT DIAMETER: 10mm - BODY MATERIAL: Hard anodized, forged aluminum with sag gradients - BODY FINISH: Fast Black - UPGRADE: over RL: 3 position floodgate lever - OPTIONS: Also available in 197x48mm and 197x51mm with AutoSag and Specialized mount, 184x48mm and 197x57mm DebonAir with Trek mount - OTHER: Weight based on 165x38mm, standard air can, no hardware

- 11-speed cassette sprocket - Tuned gear steps for maximum cadence control across the varied terrain of mountain biking. - Ride anywhere with smooth and precise HG shifting - Perfect for front single and double MTB drivetrains

Giant's Speedshield Alloy Race Fenders offer durable, all-weather protection and aluminum construction. These great fenders go on and off in no time thanks to the quick-adjusting stainless-steel hardware.

• Soft rubber grip • Chrome ends • 115mm

A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts, and is designed to work with flat or riser style handlebars to keep hands warm. - Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside - Removable Velcro cuff provides increased insulation from cold - Vent zipper can be opened if hands start to overheat - Can be easily installed and removed for temperature changes - Reflective material on seam and logo - The original S/M size is designed to fit most, measuring 10" wide across shifters/brakes and 11" long - Large size is designed for 10.5" wide across shifters/brakes, measures 12" long, and has a 1" gusset on the inside and outside seam

- Frame: ALUXX aluminum, Double Diamond - Fork: ALUXX aluminum - Shifters: NEXUS 7 RevoShift, SL-C3000-7 - Crankset: Giant Crank

- ISO Diameter: 559 / 26" MTN - ISO Width: 48mm, 49mm, 50mm, 51mm, 52mm, 53mm, 54mm - Labeled Size: 26 x 1.9-2.125 - Tube Compound: Butyl - Valve: Long Schrader - Valve Core: Removable - Valve Shaft: Smooth

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA